O. Bilaç, N. Strader, K. Tennant, W. Bullock, J. Herter, B. Jordan, D. Reynolds,
K. Sabolsky and E. Sabolsky, " Near-Field Passive Wireless Sensor for High-Temperature
Metal Corrosion Monitoring", Oral presentation at the Materials Science Technology
2024 (MST’24), Pittsburgh, PA, October 6-9, 2024.
T. Yumak, J. A. Mena, O. Bilaç, S. Waseem, W. Bullock, M. Cavalier, K. Sabolsky,
E. Sabolsky, " Effect of Rapid Sintering Techniques on Defect Formation and
Electrochemical Characteristics of Solid-Oxide Electrolysis Cell (SOEC) Materials",
Oral presentation at the Materials Science Technology 2024 (MST’24), Pittsburgh,
PA, October 6-9, 2024.
E. Demirkal, A. Hewitt, D. Banerjee, R. Barto, K. Sabolsky, K. Sierros, and E.
M. Sabolsky, "Investigation of Aging Behavior and Sensor Performance of Thiol-ene
Based UV-Curable Elastomers Printed via Direct Ink Writing for Soft Robotic
Applications," Oral presentation at the Materials Science Technology 2024 (MST’24),
Pittsburgh, PA, October 6-9, 2024.
K.M. Tennant, B.R. Jordan, N.L. Strader, M. Jerabek, J. Wilhelm, D.S. Reynolds,
E.M. Sabolsky, “Wireless Passive Ceramic Sensor for Far-Field Temperature Measurement
at High Temperatures.”Oral presentation at the Materials Science Technology
2024 (MST’24) Pittsburgh, PA, October 6-9, 2024.
C.S. Klemstine, Y. Zhong, W. Li, X. Liu, and E.M. Sabolsky, "Wet Impregnation
of Ternary and High-Entropy Nano-Coatings of a La2NiO4+δ SOEC to Improve Performance
and Stability," Oral presentation at the Materials Science Technology 2024
(MST’24), Pittsburgh, PA, October 6-9, 2024.
J. A. Mena, E. M. Sabolsky, K. Sabolsky, T. Yumak, O. Bilaç, M. Cavalier, S.
Jayasekera, "Effect of Rapid Sintering Techniques on Densification, Microstructure
and Chemical Stability of Solid-Oxide Fuel Cell (SOFC) Materials", Oral presentation
at the Materials Science Technology 2024 (MST’24), Pittsburgh, PA. October
6-9, 2024.
J. A. Mena, E. M. Sabolsky, K. Sabolsky, K. Sierros, J. Herter, "Embedded High-Temperature
Sensors: Enhancing ThermoelectricalPerformance with Refractory Composites Gradient
Layers", Oral presentation at the Materials Science Technology 2024 (MST’24),
Pittsburgh, PA. October 6-9, 2024.
S. Waseem, E.M.Sabolsky, K.Sabolsky, R. Hart, S. Hong, and M. Liu "Characterizing
Coarsening of Single- and Multi-Component Metal Composite Nano-Catalysts for
Solid Oxide Fuel Cell Operation,"Oral presentation at the Materials Science
Technology 2024(MST’24), Pittsburgh, PA, October 6-9, 2024.
E.M. Sabolsky, S. Waseem, C. Klemstine, D. Warmuth, K. Sabolsky, O. Ozmen, and
J. Tenney, “Advanced Methods for Engineering Solid-Oxide Fuel and Electrolysis
Cell (SOFC/SOEC) Microstructures for Improved Electrochemical Performance and
Stability,”
Invited oral presentation and Keynote Speaker
at the 8th International Conference on Materials Sciences and Nanomaterials (ICMSN
2024), Edinburgh, United Kingdom, July 9-12, 2024.
S. Waseem, E.M. Sabolsky, K. Sabolsky, R. Hart, and S. Hong, "Metal Composite
Nano-Catalysts for Enhanced Solid Oxide Fuel Cell Operation and Stability within
Hydrocarbon Containing Fuels,"Oral presentation at the Materials Science Technology
2023 (MST ’23), Columbus, Ohio, October 1-4, 2023.
C. Klemstine, Y. Zhong, W. Li, X. Liu, and E. Sabolsky, "Bio-inspired Surface
Engineering of an La2NiO4+δ Electrode to Modify Electrochemical Activity for
Electrolysis,"Oral presentation at the Materials Science Technology 2023 (MST’23),
Columbus, Ohio, October 1-4, 2023.
K. Tennant, E. Sabolsky, J. Wilhelm, D. Reynolds, M. Jerabek, B. Jordan, N. Strader,
K. Sivaneri, “Ceramic Far-Field Passive Wireless Sensors for High Temperature
Measurement,” Oral presentation at the Materials Science Technology 2023 (MST
’23), Columbus, Ohio, October 1-4, 2023.
J. A. Mena, E. M. Sabolsky, K. Sabolsky, K. Sierros, R. Barto and N. Voorstad,
"Doped Lanthanum Chromite-refractory Based Composites Sensors for High Temperature
Monitoring in Harsh Environments Systems,"Oral presentation at the Materials
Science Technology 2023 (MST’23). Columbus, Ohio, October 1-5, 2023.
E. Demirkal, K. Sierros, D. Banerjee, J. Burke, R. Barto, K. Sabolsky, E. Sabolsky,
``3D Printing of Silicone-Based Flexible Materials with Embedded Sensors for
Soft Robotic Actuator Applications ``Oral presentation at the Materials Science
Technology 2021 (MST’23), October 1-4, 2023.
N. Winch, J. Mena, K. Sabolsky, M. Edgell, D. Cipollone, E. Sabolsky, and K.
Sierros, “Direct Ink Writing of Semiconductive Oxide-Based Sensors for High-Temperature
Applications,” Oral Presentation at the Materials Science Technology 2023 (MST’23)
Annual Meeting in Columbus, Ohio, October 1-5, 2023.
J. Gombarick III, D. Warmuth, and E.M. Sabolsky, "Accessible Methods for Additive
Manufacturing of Artificial Coral Skeletons," Oral presentation at the WVU
16th Annual Summer Undergraduate Research Symposium, July 27, 2023.
J. Mena, K. Sabolsky, N. Winch, R. Barto, N. Voorstad, K. Sierros, E. Sabolsky,
“Oxide Semiconductor Sensors for Monitoring Advanced Energy Conversion and
Manufacturing Processes at High Temperature,” Oral presentation at XVIII ECerS
Conference Exhibition of the European Ceramic Society, July 2-6, 2023.
K. Sabolsky, A. Doiron, C. Stepp, S. Waseem, C. Klemstine, J. Tenney, E. M. Sabolsky,
“Sustainable Manufacturing of Solid-Oxide Fuel Cells Through Cold Sintering
of Electrode Materials,” Poster presentation at XVIII ECerS Conference Exhibition
of the European Ceramic Society, July 2-6, 2023.
S. Waseem, M. Barre, E.M. Sabolsky, K. Sabolsky, R. Hart, and S. Hong, "Metal
Composite Nano-Catalyst Enhanced Solid Oxide Fuel Cell Anodes for Improved
Performance and Stability with Hydrocarbon Containing Fuels,"Oral presentation
at the243rd Electrochemical Society (ECS) meeting, May 30, 2023.
C. Klemstine, Y. Zhong, X. Liu, W. Li, K. Sabolsky, and E. Sabolsky, “Infiltration
of La2NiO4+ᵟ-Type Electrodes with Nano-Oxide Catalyst to Modify Electrochemical
Properties and Stability Using Biomolecular Surface Engineering”, Poster presentation
at the 243rd ECS Meeting with SOFC-XVIII 2023 (ECS’23), May 28-June 2, 2023.
J. A. Mena, E. M. Sabolsky, K. Sabolsky, K. Sierros, R. Barto and N. Voorstad,
"Smart Refractory Sensors Development for Corrosion and Erosion Monitoring
in High Temperature Systems," Oral Presentation at ECS 243rd Meeting, Boston,
Massachusetts. May 28-June 2, 2023.
J. Tenney, E. Sabolsky, K. Sabolsky, E. Helgeson, J. Conte, H.W. Abernathy, J.
Liu, T. Yang, “Advanced Manufacturing of Unique Solid Oxide Fuel Cell Electrode
and Electrolyte Microstructures through Aerosol Deposition,” Oral presentation
at the 243rd ECS Meeting with SOFC-XVIII 2023 (ECS’23), May 28-June 2, 2023.
E. Demirkal, K. Sierros, D. Banerjee, J. Burke, K. Sabolsky, E. Sabolsky, ``Development
of 3D Printable Highly Flexible Siloxane Elastomers for Direct Ink Writing
(DIW) of Soft Robotic Actuators for Space Applications`` Oral presentation
at the 243rd ECS Meeting with SOFC-XVIII 2023 (ECS’23), May 28-June 2, 2023.
A. Kakar, D. Banerjee, E. Helgeson, K. Sierros, E. Sablosky, E. Demirkal, ``3D
Printing of Customized Embedded Sensors for Soft Robotic Applications`` Oral
presentation at the 152nd Annual Meeting Exhibition 2023 (TMS’23), March 19-23,
2023.
J. Tenney, E. Sabolsky, K. Sabolsky, E. Helgeson, J. Conte, H. Abernathy, “Additive
Manufacturing of Anode-Supported SOFCs through Aerosol Deposition” Poster presentation
at the 23rd Annual Solid Oxide Fuel Cell (SOFC) Project Review Meeting in Pittsburgh,
PA, October 25-27, 2022
J. Tenney, E. M. Sabolsky, T. Yang, K. Sabolsky, E. Helgeson, J. Conte, M. Jones,
and H. Abernathy, “Advanced Manufacturing of Controlled SOFC Electrolyte and
Electrode Microstructures through Aerosol Deposition” Oral presentation at
the Materials Science and Technology 2022 (MST’22), Pittsburgh, PA, October
9-12, 2022
K. Tennant, E. Sabolsky, J. Wilhelm, D. Reynolds, M. Jerabek, B. Jordan, N. Strader,
K. Sivaneri, “Far-Field Passive Wireless Sensors using Conductive Ceramic for
High-Temperature Health Monitoring,” Oral presentation at the Materials Science
Technology 2022 (MST ’22), Pittsburgh, PA October 9-12, 2022
S. Waseem, E.M. Sabolsky, K. Sabolsky, R. Hart, S. Hong, "Metal Composite Nano-Catalyst
Enhanced Solid Oxide Fuel Cell Anodes for Increased Stability within Hydrocarbon
Containing Fuels for Fuel Cell Embedded Aircraft Engines," Oral presentation
at the Materials Science amp; Technology 2022 (MST’22), Pittsburgh PA, October
9-12, 2022.
J. A. Mena, K. Sabolsky, A. A. Abrahamian, D. T. Cipollone, K. A. Sierros, E.
M. Sabolsky, V. Mendoza-Estrada, "High Temperature Thick Film Sensor Development
Based on Doped Lanthanum Chromite Refractory Semiconductors Materials", Oral
presentation at the Materials Science Technology 2022 (MST’22), Pittsburgh
PA, October 9-12, 2022.
B. Jordan, N Strader, D Reynolds, E. M. Sabolsky. "Passive Wireless Sensors for
Temperature and Corrosion Monitoring of Coal Boiler Components under Flexible
Operation". Oral presentation at the Materials Science Technology 2022 (MST#39;22),
Pittsburgh, PA, October 9th - 12th, 2022.
J. A. Mena, K. Sabolsky, A. A. Abrahamian, D. T. Cipollone, K. A. Sierros, E.
M. Sabolsky, V. Mendoza-Estrada. "High Temperature Thick Film Sensor Development
Based on Refractory Oxide Semiconductors," Oral presentation at the International
Conference on Materials Sciences and Nanomaterials 2022 (ICMSN- 22), London,
UK, July 12-14, 2022.
A. Kakar, D. Banerjee, E. M. Sabolsky, K. Sierros, "Controlled Embedding of Multidimensional
Flexible SensorsUsing Direct Ink Writing", Oral presentation at the TMS 2022,
Anaheim, CA, Feb. 27th – Mar. 3rd, 2022.
J. Burke, D. Banerjee, D. Cipollone, C.-H. Chang, H. Mei, E. Sabolsky, K. Sierros,
"Coaxial Core-shell Direct Ink Writing of Conductive Elastomeric Fibers,” Oral
presentation at the TMS 2022, Anaheim, CA, Feb. 27th – Mar. 3rd, 2022.
D. Banerjee, J. Burke, H. Mei, C.-H. Chang, E. Sabolsky, and K. Sierros, “Coaxial
Core-Shell Direct Ink Writing of Flexible Sensors,” Oral presentation at the
Materials Research Society 2021 (MRS ’21), Boston, MA Virtual Meeting, December
6-8, 2021.
D. Cipollone, J.A. Mena, K. Sierros, and E.M Sabolsky, “Out of the Lab: 3D Printing
on Non-Ideal Surfaces.” Oral presentation at the Materials Science Technology
2021 (MST’21) Virtual Meeting, October 17-20, 2021.
Brian R. Jordan, Kavin Sivaneri, E. M. Sabolsky and D. Reynolds "High Temperature
Corrosion Sensors for Boiler Grade Stainless Steel in Power Plants," Oral presentation
at the Material Science and Technology 2021 (MST21) Virtual meeting, October
17-20, 2021.
J. Tenney, E.M. Sabolsky, G.A. Yakaboylu, J. Conte, M. Jones, I. Fontana, K.
Sabolsky, H. Abernathy, and G. Hackett, "Fabrication of Microstructurally Engineered
Composite Electrodes for SOFC Applications through Additive Manufacturing,"
Oral presentation at the Materials Science and Technology 2021 (MST'21) Virtual
Meeting, October 17-20, 2021.
J. A. Mena, K. Sabolsky, E.M Sabolsky, K. Sierros and K. S. Varadharajan, "Electrical,
Structural and Thermomechanical Properties of Doped-LaCrO3 Ceramics for High
Temperature Electronics and Sensing Applications," Oral presentation at the
Materials Science Technology 2021 (MST’21) Virtual Meeting, October 17-20,
2021.
Z. Yang, J. A. Mena, J. Conte, B. Jordan, K. Sabolsky, K. A. Sierros, and E.
M. Sabolsky, "Characterization and High Temperature Electrical Properties of
Brazed Joints of La0.8Sr0.2CrO3 with Nickel and Nickel Alloys. " Oral presentation
at the Materials Science Technology 2021 (MST’21) Virtual Meeting, October
17-20, 2021.
S. Waseem, E.M. Sabolsky, K. Sabolsky, Ö. Özmen, R. Hart, S. Hong, S. Lee, G.Hackett,
and H. Abernathy, "Nano-Catalyst Enhanced Solid Oxide Fuel Cell Anodes for
Increased Stability within Hydrocarbon Containing Fuels," Oral presentation
at the Materials Science Technology 2021 (MST’21) Virtual Meeting, October
17-20, 2021.
A. Kakar, E.M. Sabolsky, D. Banerjee and K. Sierros, “Direct-writing of Embedded
Flexible Sensors for Strain and Temperature Monitoring for Stretchable Applications”,
Oral presentation at the Materials Science Technology 2021 (MST’21) Virtual
Meeting, October 17-20, 2021.
K.S. Varadharajan Idhaiam, M. Barre, Z.J. Lynch, E. Ciftyurek, K. Sabolsky, E.M.
Sabolsky, K.A. Sierros, and D. Reynolds, “Evaluation of High Temperature Planar
Passive Wireless Sensor Fabricated by Stereolithography Process,” Oral presentation
at the Materials Science Technology 2021 (MST’21) Virtual Meeting, October
17-20, 2021.
A. Arnold, K. S. V. Idhaiam, R. Steidler, K. Niecgorski, J. Su, and E.M. Sabolsky,
“Ionic Polymer-Metal Composite (IPMC) Degradation Study and Solution Considerations
for Biomimetic Thin-film Actuator Applications,” Oral presentation at the Materials
Science Technology 2021 (MST’21) Hybrid (Virtual and In-Person) Meeting, October
17-20, 2021.
A. Kakar, E.M. Sabolsky, D. Banerjee and K. Sierros, “Failure Mechanisms of Embedded
Flexible Strain Sensors for Soft Robotics,” Oral presentation at the Materials
Research Society 2021 (MRS ’21), Boston, MA Virtual Meeting, December 6-8,
2021.
G.A. Yakaboylu, R.C. Pillai, K. Sabolsky, T. Yumak, and E.M. Sabolsky, “Processing,
Stability and High Temperature Properties of Transition Metal Silicide-Refractory
Oxide Composites for Harsh Environment Sensing Applications,”
Invited oral presentation
at the Materials Science Technology 2020 (MST’20) Virtual Meeting, November 2-6,
2020.
G.A. Yakaboylu, D. Baker, K. Sabolsky, J.W. Zondlo, C. Wildfire, and E.M. Sabolsky,
“Microwave-Assisted Pretreatment of Coal Fly Ash for Enhanced Recovery of Rare-Earth
Elements,” Oral presentation at the Materials Science Technology 2020 (MST’20)
Virtual Meeting, November 2-6, 2020.
A.M. Arnold, K. S. Varadharajan, L. Hilgar, E.M. Sabolsky, and J. Su, “Performance
Analysis of Biomimetic Ionic Polymer-metal Composite (IPMC) Thin-Film Actuators”,
Oral presentation at the Materials Science Technology 2020 (MST’20) Virtual
Meeting, November 2-6, 2020.
J.A. Mena, K.V. Sivaneri, G.A. Yakaboylu, E.M. Sabolsky, K. Sabolsky, and K.
Sierros, “Evaluation of Doped-LaCrO3 Ceramics for High Temperature Sensor Applications”,
Oral presentation at the Materials Science Technology 2020 (MST’20) Virtual
Meeting, November 2-6, 2020.
K.S. Varadharajan Idhaiam, D. Cipollone, K. Sabolsky, E.M. Sabolsky, K. Sierros,
and D. Reynolds, “Additive Manufacturing of Miniaturized RFID Tag Using Electroceramic
Materials for High Temperature Wireless Sensing Applications”, Oral presentation
at the Materials Science Technology 2020 (MST’20) Virtual Meeting, November
2-6, 2020.
C. Wildfire, A. Carter, E.M. Sabolsky, D. Shekhawat, and D. Haynes, “Ionic and
Mixed Ionic Electronic Conductor Oxides for Microwave Active Catalyst”, Oral
presentation at the Materials Science Technology 2020 (MST’20) Virtual Meeting,
November 2-6, 2020.
K. Hager, C. Wildfire, E.M. Sabolsky, and T. Musho, “Developing Granular Dielectrics
Based on Reconstructed Micro-CT Images”, Oral presentation at the Materials
Science Technology 2020 (MST’20) Virtual Meeting, November 2-6, 2020.
K.S. Varadharajan Idhaiam, G.A. Yakaboylu, P.D. Pozo, M. Thomas, R. Vozar, K.
Sabolsky, E.M. Sabolsky, K.A. Sierros, and D. Reynolds, “Evaluation of Electroceramic-based
LC Resonator for Monitoring High Temperature Systems”, Oral presentation at
the Materials Science Technology 2020 (MST’20) Virtual Meeting, November 2-6,
2020.
J. Colón Rodríguez, N.F. Harun, N. Zhou, E.M. Sabolsky, and D. Tucker, "System
Analysis of a 100kW Internal Combustion Engine (ICE) Solid Oxide Fuel Cell
(SOFC) Hybrid Configuration", Oral presentation at the ASME 2020 Power Conference
collocated with the 2020 International Conference on Nuclear Engineering, ASME
2020 Power Conference, Virtual Meeting, August 4–5 (2020).
G.A. Yakaboylu, D. Baker, B. Wayda, K. Sabolsky, J.W. Zondlo, C. Wildfire, and
E.M. Sabolsky, "Utilization of Microwave Technology in the Enrichment of Critical
Rare Earth Elements from Coal Fly Ash", Oral presentation at the Materials
Science Technology 2019 (MST’19) Meeting, Portland, OR, September 29 - October
3, 2019.
O. Ozmen, S. Lee, G. Hackett, H. Abernathy, and E. M. Sabolsky, “Investigation
of the Deposition Mechanism of Nano-CeO 2 Catalyst within SOFC Electrodes Using
Bio-Adhesive Catechol Surfactant”, Oral presentation at the Materials Science
Technology 2019 (MST’19),Portland, OR, September 29-October 3, 2019.
A. M. Arnold, K. S. Varadharajan, K. Tennant, L. Leyzorek, E. M. Sabolsky, and
J. Su, “Fabrication and Analysis of Biomimetic Micro-patterned Ionic Polymer-Metal
Composite (IPMC) Thin-film Actuators”, Oral presentation at the Materials Science
Technology 2019 (MST’19) Meeting,Portland, OR, September 29 - October 3, 2019.
K. S. Varadharajan Idhaiam, K. Sabolsky, L. Redinger, E. M. Sabolsky, H. Palakurthi1,
and D. Reynolds,“Electroceramic-based Passive Wireless Sensors for Monitoring
High Temperature Systems”, Oral presentation at the Materials Science Technology
2019 (MST’19) Meeting, Portland, OR, September 29 – October 3, 2019.
A. M. Arnold, K. S. Varadharajan, K. Tennant, E. M. Sabolsky, and J. Su, “Effect
of Environmental Conditions, Electromechanical Cycling, and Aging on the Performance
Stability of Nafion -Ptand -Ag IPMCs”, Oral presentation at the Conference
on Smart Materials, Adaptive Structures and Intelligent Systems, 2019 (SMASIS
2019) Meeting, Louisville, KY, September 9-11, 2019.
O. Ozmen, S. Lee, G. Hackett, H. Abernathy, and E. M. Sabolsky, “Efficient and
Controlled Nano-catalyst Solid-Oxide Fuel Cell Electrode Infiltration Assisted
with Catechol Surfactants” Oral presentation at the 16 th European Ceramic
Society Conference 2019 (XVI. ECerS), Torino, Italy,June 16-20, 2019.
K. Sabolsky, T. Thomas, H. Qi, E.M. Sabolsky, X. Liu, J.W. Zondlo, and R. Hart,
“Redox Stability of Alternative Ceramic Compositions for Solid Oxide Fuel Cell
Anodes,” Poster presentation at the16 th European Ceramic Society Conference
2019 (XVI. ECerS), Torino, Italy, June 16-20, 2019.
K. S. Varadharajan, K. Sabolsky, E. M. Sabolsky, H. Palakurthi1, D. Reynolds,
and K. Sierros,“Embedded Ceramic-Based Passive Wireless Sensors for Harsh-Environment
Applications”, Oral presentation at the 235 th Electrochemical Society (ECS)
Meeting, Dallas, TX, May 26-30, 2019.
G.A Yakaboylu, C. Jiang, T. Yumak, J.W. Zondlo, J. Wang, E.M. Sabolsky, "Influence
of Processing Routes on the Electrochemical Performance of Supercapacitors
(EDLCs) Fabricated from Biomass-Derived Activated Carbons", Oral presentation
at the 235th Electrochemical Society (ECS) Meeting, Dallas, TX, May 26-30,
2019
K. S. Varadharajan, K. Sabolsky, E. M. Sabolsky, H. Palakurthi, D. Reynolds,
K. Sierros, “Thick Film Electroceramic Composites for Harsh-environment Sensor
Applications”, Oral presentation at the Materials Science Technology 2018 (MST’18)
Meeting, Columbus, OH, October 14-18, 2018.
G.A. Yakaboylu, R.C. Pillai, K. Sabolsky, T. Yumak, E.M. Sabolsky, “Transition
Metal Silicide-based Ceramic Composites for High Temperature and Harsh Environment
Sensing”, Oral presentation at the Materials Science Technology 2018 (MST’18)
Meeting, Columbus, OH, October 14-18, 2018.
T. Yumak, G.A. Yakaboylu, C. Jiang, J. Zondlo, J. Wang, E.M. Sabolsky, “Template-free
Synthesis of Highly Ordered Mesoporous Carbons (HOMCs) for Supercapacitor Applications”,
Oral presentation at the Materials Science Technology 2018 (MST’18) Meeting,
Columbus, OH, October 14-18, 2018.
O. Ozmen, J. W. Zondlo, E. M. Sabolsky, S. Lee, G. Hackett, H. Abernathy, N.
J. Kidner, M. M. Seabaugh, "Nano-CeO2 Catalyst Deposition using Bio-Adhesive
Catechol Surfactants for Efficient Enhancement of SOFC Electrodes", Oral presentation
at the Materials Science Technology 2018 (MST'18) Meeting, Columbus, OH, October
14-18, 2018.
E.M. Sabolsky, G. Yakaboylu, K. Sabolsky, J. Zondlo, T. Musho, C. Wildfire, D.
Shekhawat, "Enrichment of Rare Earths from Coal Fly Ash through Microwave-assisted
Comminution and Microwave Pyrometallurgy", Oral presentation at the Materials
Science Technology 2018 (MST’18) Meeting, Columbus, OH, October 14-18, 2018.
K. Sabolsky, G. Yakaboylu, K. Sivaneri, B. Buzzo, E.M. Sabolsky, J. Bogan, M.
Raughley, “Embedded Sensors within Ceramic Refractory for High-temperature
Process and Health Monitoring”, Poster presentation at the Materials Science
Technology 2018 (MST’18) Meeting, Columbus, OH, October 14-18, 2018.
A.M. Arnold, K.M. Tennant, K.S. Varadharajan Idhaiam, J. Su, E.M. Sabolsky, "Passive
and Active Biomimetic Micro-Patterned Surfaces and Actuators for Flow Manipulation
and Aerodynamic Drag Reduction," Oral presentation at the Materials Science
Technology 2018 (MST'18) Meeting, Columbus, OH, October 14-18, 2018.
J. Meyer, K. S. Varadhrajan Idaiam, E. M. Sabolsky, T. H. Evans, P. Klinkhachorn,
“Thin Film Dielectric Polymer-ceramic Composites for Flexible Tactile Sensors
Embedded within Robotic End-effectors”, Oral presentation at the Materials
Science Technology 2018 (MST’18) Meeting, Columbus, OH, October 14-18, 2018.
E.M. Sabolsky, G.A. Yakaboylu, T. Yumak, C. Jiang, E. Çiftyürek, J. Zondlo, and
J. Wang, “Template-free Synthesis of Mesoporous Carbons for Supercapacitor
Applications,” Invited oral presentation at the Global Bamboo and Rattan Congress
2018, National Convention Center, Bejing, China, June 25-27, 2018.
O. Oginni, K. Singh, L. McDonald, T. Yumak, E. Sabolsky, and L. Sivanandan, Effect
of Activation Agent’s Impregnation Route on Activated Carbon Properties,” Oral
presentation at the USBI Biochar 2018, Wilmington, Delaware, August 20-23,
2018.
O. Oginni, K. Singh, L. McDonald, T. Yumak, E. Sabolsky, and L. Sivanandan, “Effect
of Impregnation Route on Activated Carbon Properties from Herbaceous Biomass,”
Oral presentation at the 2018 American Society of Agricultural and Biological
Engineers, Detroit, MI, July 28-August 2, 2018.
T. Yumak, T., G. A. Yakaboylu, D. Bragg, O. Oginni, K. Singh and E. M. Sabolsky,
“Surface Enhancement of Biomass-derived Activated Carbons for Supercapacitor
Applications. Oral presentation at the 2018 American Society of Agricultural
and Biological Engineers, Detroit, MI, July 28- August 2, 2018.
O. Oginni, C. Crowley, K. Singh, L. McDonald, T. Yumak, E. Sabolsky, and L. Sivanandan,
“Pyrolysis Characteristics of White Pine and Norway Spruce Needles,” Poster
presentation at the 2018 Northeast Agricultural and Biological Engineering
Conference, Morgantown, WV, July 15-18, 2018.
O. Oginni, K. Singh, L. McDonald, T. Yumak, E. Sabolsky, and L. Sivanandan. “Effect
of Activation Agent Impregnation Route on Activated Carbon Properties,” Oral
presentation at the 2018 Northeast Agricultural and Biological Engineering
Conference, Morgantown, WV, July 15-18, 2018.
T. Yumak, G. A. Yakaboylu, O. Oginni, K. Singh, and E. M. Sabolsky, “Metal Oxide
Modification of Waste Biomass for Supercapacitor Applications,” Oral presentation
at the 2018 Northeast Agricultural and Biological Engineering Conference, Morgantown,
WV, July 15-18, 2018.
E. Sabolsky, K. Sabolsky, G. Yakaboylu, and B. Buzzo, “Fabrication and Testing
of Smart Refractory Sensors for Energy System Monitoring in Harsh-Environments,”
Oral presentation at the 15th International Conference on Optical and Electronic
Sensors (COE2018), Warsaw, Poland, June 18-20, 2018.
K. Sabolsky, G.A. Yakaboylu, K.A. Sierros, E.M. Sabolsky, M.R. Comparetto, D.S.
Reynolds, J. Bogan, M. Raughley, and J. Sayre, “High-temperature Ceramic Sensors
for Assessing Refractory and Component Conditions,” Poster presentation at
the 14th International Ceramics Congress (CIMTEC2018), Perugia, Italy, June
4-8, 2018.
O. Ozmen, K. Sabolsky, J.W. Zondlo, E.M. Sabolsky, S. Lee, G. Hackett, and H.
Abernathy, “Nano-catalyst Infiltration Enhancement of Porous Solid Oxide Fuel
Cell Electrodes Using Catechol Surfactants,” Oral presentation at the 14th
International Ceramics Congress (CIMTEC2018), Perugia, Italy, June 4-8, 2018.
K. Sabolsky, G.A. Yakaboylu, K. Sivaneri Varadharajan Idhaiam, B. Buzzo, M. Comparetto,
D.S. Reynolds, K. Sierros, E.M. Sabolsky, J. Bogan, and M. Raughley, “Temperature
and Spallation Sensors Based on Oxide and Oxide/Silicide Composites for High-Temperature
System Monitoring,” Poster presentation at the 233rd Electrochemical Society
Meeting, Seattle, WA, May 13-17, 2018.
K. Sivaneri Varadharajan Idhaiam, K. Jones, G. Naidu, K. Sabolsky, and E.M. Sabolsky,
“Thin and Thick Film Ceramic-based Passive Wireless Temperature Sensors for
Harsh Environments,” Oral presentation at the 233rd Electrochemical Society
Meeting, Seattle, WA, May 13-17, 2018.
G.A. Yakaboylu, R. Chockalingham Pillai, K. Sabolsky, D.J. Haynes, and E.M. Sabolsky,
“Metal Silicide-Refractory Oxide Ceramic Composites for Harsh-Environment Sensing:
Processing, Stability and Thermoelectric Properties,” Oral presentation at
the 233rd Electrochemical Society Meeting, Seattle, WA, May 13-17, 2018.
O. Ozmen, S. Lee, J.W. Zondlo, G.A. Hackett, H. Abernathy, and E.M. Sabolsky.
“Enhanced Nano-Catalyst Infiltration of Anode-Supported SOFCs through Surface
Modification of Electrodes by Catechol Surfactants,” Oral presentation at the
233rd Electrochemical Society Meeting, Seattle, WA, May 13-17, 2018.
T. Yumak, G. A. Yakaboylu, D. Bragg, O. Oginni, K. Singh, and E. M. Sabolsky.
“Nano-Oxide Enhancement of Biomass-Derived Activated Carbons for Supercapacitor
Applications,” Oral presentation at the 233rd Electrochemical Society Meeting,
Seattle, WA, May 13-17, 2018.
O. Oginni, K. Singh, L. McDonald, T. Yumak, E. Sabolsky, and L. Sivanandan, “Adsorption
of Pharmaceutical Active Compounds Using Activated Carbons Synthesized from
Herbaceous Biomass,” Oral presentation at the 255th ACS National Meeting, New
Orleans, LA, March 17-22, 2018.
C. Wildfire, E.M. Sabolsky, M. Spencer, D. Shekhawat, “Investigation of Microwave
Solid State Synthesis of Highly Ordered Structures,” Oral presentation at the
Materials Science Technology 2017 (MST’17) Meeting, Pittsburgh, PA, October
8-12, 2017.
K.S. Varadharajan Idhaiam, E.M. Sabolsky, T.H. Evans and D. DeVallance, "Flexible
Laminar Polymer-Ceramic Composite Material for Harsh Environment Robotic Tactile
Sensor Application", Oral presentation at the Materials Science Technology
2017 (MST’17) Meeting, Pittsburgh, PA, October 8-12, 2017.
A.M. Arnold, J. Schrout, W. Huebsch, P. Browning, and E.M. Sabolsky, "Passive
and Active Micro-Surfaces and Actuators for Aerodynamic Drag Reduction", Oral
presentation at the Materials Science Technology 2017 (MST’17) Meeting, Pittsburgh,
PA, October 8-12, 2017.
N. Ranganathan, K. Sabolsky, J. Ingersoll, M. Comparretto, D. Reynolds, K. Sierros,
and E.M. Sabolsky, “Thick Film Ceramic Sensors Fabricated by Direct-writing
for Temperature and Health Monitoring in Harsh-environments,” Oral presentation
at the Materials Science Technology 2017 (MST’17) Meeting, Pittsburgh, PA,
October 8-12, 2017.
G.A. Yakaboylu, R.C. Pillai, K. Sabolsky, D.J. Haynes and E.M. Sabolsky, "Metal
Silicide-Refractory Oxide Electroconductive Ceramic Composites for High-Temperature
and Harsh-Environment Electrical Applications", Oral presentation at the Materials
Science Technology 2017 (MST’17) Meeting, Pittsburgh, PA, October 8-12, 2017.
E. Çiftyürek, T. Yumak, O. Oginni, K. Singh, L. Sivanandan and E.M. Sabolsky,
"Activated Carbon Applications for Electrode Material and Adsorbent", Oral
presentation at the 40th International Activated Carbon Conference, Pittsburgh,
PA, September 14-15, 2017.
E. Çiftyürek, K. Singh, L. Sivanandan, K. Sabolsky, T. Yumak and E.M. Sabolsky,
"Hybrid Supercapacitors Fabricated from Commercial Organic Wastes and Metal
Oxides", Oral presentation at the Materials Science Technology 2017 (MST’17)
Meeting, Pittsburgh, PA, October 8-12, 2017.
O. Ozmen, S. Lee, G.A. Hackett, H. Abernathy and E.M. Sabolsky, “Single-Step
Anode Supported SOFC Electrode Infiltration Using Bio-Adhesive Catechol Surfactants”,
Oral presentation at the Materials Science Technology (MST’17) Meeting, Pittsburgh,
PA, October 8-12, 2017.
O. Ozmen, S. Lee, G.A. Hackett, H. Abernathy and E.M. Sabolsky, “Bio-Surfactant
Assisted Infiltration of SOFC Electrodes”, Poster presentation at the 15th
International Symposium on Solid Oxide Fuel Cells, Hollywood, FL, July 23-28,
2017.
J. Liu, Y. Yu, T. Yang, O. Ozmen, H. Finklea, E.M. Sabolsky, H. Abernathy, P.R.
Ohodnicki Jr., and G.A. Hackett, “The Electrochemical Performance of LSM with
A-site Non-Stoichiometry Under Cathodic Polarization”, Poster presentation
at the 15th International Symposium on Solid Oxide Fuel Cells, Hollywood, FL,
July 23-28, 2017.
T. Thomas, H. Qi, E.M. Sabolsky, J. Zondlo, X. Liu and R. Hart, "Effect of Mg/Mo
Ratio in a Stoichiometric Sr2MgMoO6 (SMM) Redox-Stable Anode", Oral presentation
at the 15th International Symposium on Solid Oxide Fuel Cells (SOFC-XV), Hollywood,
Florida, July 23-28, 2017.
E. Çiftyürek, K. Singh, L. Sivanandan, and E. Sabolsky, “Supercapacitor Electrodes
Fabricated from Highly Activated Microporous Carbons Extracted from Commercial
Fruit Wastes,” Oral presentation at the American Society of Agricultural and
Biological Engineers, Spokane, WA, July 18, 2017.
O. Ozmen, S. Lee, G.A. Hackett, H. Abernathy and E.M. Sabolsky, “Nano-Catalyst
Infiltration by Bio-Surfactant Catechol Modification of Anode Supported SOFC
Electrodes”, Poster presentation at the 18th Annual Solid Oxide Fuel Cell (SOFC)
Project Review Meeting, Pittsburgh, PA, June 12-14, 2017.
J. Liu, H. Finklea, Y. Yu, T. Yang, O. Ozmen, E.M. Sabolsky, H. Abernathy, P.R.
Ohodnicki Jr., and G.A. Hackett, “The Electrochemical Performance of LSM with
A-site Non-Stoichiometry Under Cathodic Polarization”, Poster presentation
at the 18th Annual Solid Oxide Fuel Cell (SOFC) Project Review Meeting, Pittsburgh,
PA, June 12-14, 2017.
E.M. Sabolsky, X. Liu, J. Zondlo, H. Qi, T. Thomas, R. Hart, and E. Jezek, "Investigation
of Alternative Mixed-Conducting Oxides for SOFC Anode Applications", Oral presentation
at the 231st ECS Meeting, New Orleans, LA, May 28- June 1, 2017.
E.M. Sabolsky, D. Bhattacharyya, J. Bogan, D. Graham, V. Kulathumani, K. Sabolsky,
G.A. Yakaboylu, “Smart Refractory Sensor Systems for Wireless Monitoring of
Temperature, Health, and Degradation of Slagging Gasifiers”, Oral presentation
at the U.S. Department of Energy – NETL Project Review Meeting for Crosscutting
Research, Gasification Systems, and Rare Earth Elements Research Portfolios,
Pittsburgh, PA, March 20-23, 2017.
T. Thomas, H. Qi, E.M. Sabolsky, J. Zondlo, X. Liu and R. Hart, "Redox Stable
Anode Materials for SOFC", Oral presentation at the 41st International Conference
and Expo on Advanced Ceramics and Composites, Daytona Beach, Florida, January
22-27, 2017.
G. Yakaboylu, R. Chockalingham, K. Sabolsky, J. Mayer, E.M. Sabolsky, J. Bogan,
M. Raughley, and J. Sayre, "Electroceramic Composite Sensors for Monitoring
Harsh-Environment Energy Systems,” Oral presentation at the Materials Science
Technology 2016 (MST’16) Conference, Salt Lake City, UT, October 23-27, 2016.
O. Ozmen, J. W. Zondlo, S. Lee, G. Hackett, H. Abernathy, and E. M. Sabolsky,
"Nano-Catalyst Impregnation Optimization of SOFC Electrodes Using Catechol
Surfactant", Oral presentation at the Materials Science Technology 2016 (MST’16)
Conference, Salt Lake City, UT, October 23-27, 2016.
K. Singh, E. Çiftyürek, E.M. Sabolsky, D. Bhattacharyya, and L. Sivanandan, “Highly
Activated Microporous Carbons (HAMC) from Fruit Dehydration Wastes-Characterization
for Adsorption and Electrochemical Applications Experimental Plan Introduction”
WRRC, USDA, Albany, CA, S1041 MultiState Project Meeting, August 2016.
O. Ozmen, J. W. Zondlo, S. Lee, H. Abernathy and E. M. Sabolsky, “Bio-surfactant
Assisted Catalyst Infiltration of SOFC Electrodes”, Poster presentation at
the 17th Annual SECA Workshop, Pittsburgh, PA, July 19-21, 2016.
E. Çiftyürek, K. Sabolsky, and E.M. Sabolsky, "MgO-Modified SrMoO4 and Nano-SrMoO4
Sensing Materials for H2 and SO2 Detection at High Temperatures," Oral presentation
at 5th International Conference Smart and Multifunctional Materials Structures
and Systems, CIMTEC Congress 2016, Perugia, Italy, June 5-9, 2016.
O. Ozmen, K. Sabolsky, J. Zondlo, E.M. Sabolsky, S. Lee, and K. Gerdes, "Catalyst
Infiltration of SOFC Electrodes Assisted by a Bio-surfactant," Poster presentation
at 5th International Conference Smart and Multifunctional Materials Structures
and Systems, CIMTEC Congress 2016, Perugia, Italy, June 5-9, 2016.
E. Çiftyürek, K. Sabolsky, E.M. Sabolsky, “Novel Synthesis and Processing of
MgO-doped SrMoO4 Micro-fibers for High Temperature Selective Detection of Hydrogen”,
Invited oral presentation at Gordon Research Seminars (GRS), Solid State Studies
in Ceramics, At Mount Holyoke College, South Hadley, MA, Volume: Creating Functionality
of Advanced Ceramics by Innovative Materials Processing, July 31-August 5,
2016.
E. Çiftyürek, K. Sabolsky, E.M. Sabolsky, “Novel Synthesis and Characterization
of MgO-doped SrMoO4 Micro-fibers for High Temperature Selective Detection of
Hydrogen”, Poster presentation at the Gordon Research Conference (GRC), Solid
State Studies in Ceramics, At Mount Holyoke College, South Hadley, MA, Volume:
Creating Functionality of Advanced Ceramics by Innovative Materials Processing,
July 31-August 5, 2016.
G.A. Yakaboylu, R. Chockalingam, K. Sabolsky and E.M. Sabolsky, "Processing of
Metal Silicide/Refractory Oxide Composites for High-temperature and Harsh-environment
Sensing Applications", Poster presentation at the Gordon Research Conference:
Ceramics, Solid State Studies in (GRC), South Hadley, MA, July 31-August 5,
2016.
R.C. Pillai, G.A. Yakaboylu, K. Sabolsky, E.M. Sabolsky, J. Bogan, and J. Sayre,
“Composite Ceramic Thermocouples for Harsh-Environment Temperature Measurements”,
Oral Presentation at the 40th International Conference and Exposition on Advanced
Ceramics and Composites (ICACC'16), Daytona Beach, FL, January 22-27, 2016.
G.A. Yakaboylu, R. Chockalingam, B. Armour, K. Sabolsky and E.M. Sabolsky, "Conductive
Ceramic Composites for Fabricating High Temperature and Harsh Environment Sensors:
Thermal Processing, Stability and Properties", Oral presentation at the 40th
International Conference and Exposition on Advanced Ceramics and Composites
(ICACC'16), Daytona Beach, FL, January 24-29, 2016.
R.C. Pillai, E.M. Sabolsky, K. Sabolsky, G.A.Yakaboylu, B. Armour, T. Close and
M. Palmisiano, “Ceramic Composite Thermocouples for Monitoring the Health and
Process Conditions of High-Temperature Energy Systems,” Oral presentation at
the Materials Science Technology 2015 (MST’15) Conference, Columbus, OH, October
4-8, 2015.
G. A. Yakaboylu, R. Chockalingam, B. Armour, K. Sabolsky, and E. M. Sabolsky,
"Development of Refractory Oxide/Metal Silicide Composites for High-Temperature
Harsh-Environment Sensor Applications", Oral presentation at the Materials
Science Technology 2015 (MST'15) Conference, Columbus, OH, October 4-8, 2015.
O. Ozmen, S. Lee, K. Gerdes, J. W. Zondlo, K. Sabolsky, and E. M. Sabolsky, "Bio-surfactant
Assisted Infiltration of Anode-supported SOFC Electrodes," Oral presentation
at the Materials Science Technology 2015 (MST’15) Conference, Columbus, Ohio,
October 4-8, 2015.
T.B.A. Ross, E.M. Sabolsky, J.W. Zondlo, I. Celik, H. Sezer, and K. Sabolsky,
“Performance and Stability of Large Planar Solid Oxide Fuel Cells Using PH3
Contaminated H2 Fuel,” Oral presentation at the Materials Science Technology
2015 (MST’15) Conference, Columbus, Ohio, October 4-8, 2015.
K. Sabolsky, E. M. Sabolsky, J. Christian, J. Harp, and J. Zondlo, "Palladium-based
Cermet Electrodes for Solid-Oxide Electrolysis of Dry Carbon Dioxide," Poster
presentation at European Materials Research Society 2015 Fall Meeting, Warsaw,
Poland, September 15-18, 2015.
K.M. Dunnick, R. Pillai, K.L. Pisane, A.B. Stefaniak, E.M. Sabolsky, and S.S.
Leonard, “Effect of Valence State on CeO2 Nanoparticle Toxicity in Rats,” Oral
presentation at the 29th Annual Meeting of the Allegheny-Erie Society of Toxicology
Regional Chapter, Morgantown, WV, June 3-4, 2015.
E.M. Sabolsky, O. Ozmen, S. Lee, K. Gerdes, and J.W. Zondlo, “Mussel Inspired
Bio-template Assisted SOFC Electrode Infiltration,” 14th International Conference
of European Ceramic Society, Toledo, Spain, June 21-25, 2015.
E.M. Sabolsky, R. C. Pillai, K. Sabolsky, G. Yakaboylu, B. Armour, O. Ozmen,
D. Bhattacharyya, D. Graham, V. Kulathumani, T. Close and M. Palmisiano, “Conductive
Ceramic Composites Used to Fabricate Embedded Sensors for Monitoring the Temperature
and Health of Slagging Gasifiers,” 14th International Conference of European
Ceramic Society, Toledo, Spain, June 21-25, 2015.
K. Sabolsky, E. M. Sabolsky, J. Christian, J. Harp, and J.W. Zondlo, "Solid-Oxide
Electrolysis of Dry CO2 Using Precious Metal-Based Electrodes," Poster presentation
at 14th International Conference of European Ceramic Society, Toledo, Spain,
June 21-25, 2015.
O. Ozmen, S. Lee, K. Gerdes, J.W. Zondlo, K. Sabolsky, and E.M. Sabolsky, “Porous
SOFC Electrode Infiltration Methods by Bio-Adhesive Templating,” Oral presentation
at the Electrochemical Society (ECS) Spring’15 Meeting, Chicago, IL, USA, May
24-28, 2015.
K. Sabolsky, E. M. Sabolsky, J. Christian, J. Harp, and J. Zondlo, "Electrode
Investigation for the Solid-Oxide Electrolysis of Dry CO2 for O2 Production."
Poster presentation at 227th Electrochemical Society Meeting, Chicago, IL,
May 24-28, 2015.
E.M. Sabolsky, R. C. Pillai, K. Sabolsky, G. Yakaboylu, B. Armour, A. Teter,
O. Ozmen, D. Bhattacharyya, D. Graham, V. Kulathumani, T. Close, and M. Palmisiano,
“Refractory Ceramic Sensors for Processing and Health Monitoring of Slagging
Gasifiers”, Invited oral presentation at the 227th at the Electrochemical Society
Meeting, May 24-30, 2015, Chicago, IL., USA.
G. A. Yakaboylu, R. Chockalingam, S. Chockalingam, B. Armour, M. Palmisiano,
K. Sabolsky, and E. M. Sabolsky, "Thermal Processing and Properties of Conductive
Refractory Composites for High-Temperature Electrical Applications," Oral presentation
at the 39th International Conference Exposition on Advanced Ceramics Composites
(ICACC'15), Daytona Beach, FL, January 25-30, 2015.
O. Ozmen, S. Lee, K. Gerdes, J.W. Zondlo, K. Sabolsky, and E.M. Sabolsky, “Bio-template
Assisted Nano-catalyst Infiltration of Porous SOFC Electrodes,” Oral presentation
at the International Conference on Advanced Ceramics and Composites (ICACC'15),
Daytona Beach, FL, USA, January 25-30, 2015.
E.M. Sabolsky, K. Sabolsky, R. C. Pillai, G. Yakaboylu, B. Armour, A. Teter and
M. Palmisiano, “Refractory Oxide/Silicide Based Sensors for High Temperature
Harsh Environmental Applications,” Oral presentation at the 39th International
Conference and Exposition on Advanced Ceramics and Composites (ICACC’15) Conference,
Daytona Beach, FL, January 25-30, 2015.
J. Yancey, M. Smith, D. Berry, D. Haynes, D. Shekhawat, and E.M. Sabolsky, “Continuous
Spray Synthesis of Doped-Pyrochlore Oxide Catalysts for Hydrocarbon Reforming,”
Oral presentation at the 39th International Conference and Exposition on Advanced
Ceramics and Composites (ICACC’15) Conference, Daytona Beach, FL, January 25-30,
2015.
J. Yancey, K. O’Connell, M. Smith, D. Berry, D. Haynes, D. Shekhawat, E.M. Sabolsky,
“Synthesis of Doped-Lanthanum Zirconate by Spray Pyrolysis,” Poster presentation
at the 2014 AIChE Annual Meeting, Atlanta, Georgia, November 16-21, 2014.
O. Ozmen, S. Lee, K. Gerdes, J. W. Zondlo, K. Sabolsky, E.M. Sabolsky, “Strategies
for Nano-catalyst Infiltration of Porous SOFC Electrodes,” Oral presentation
at the Materials Science Technology 2014 (MST’14) Conference, Pittsburgh, PA,
October 12-16, 2014.
L. Kogan, T. L. Weadon, T. Evans, D. B. DeVallance, E. M. Sabolsky, “Embedding
Capacitive Tactile Sensors for Space Applications,” Oral presentation at the
Materials Science Technology 2014 (MST’14) Conference, Pittsburgh, PA, October
12-16, 2014.
S. Chockalingam, R. Chockalingam, K. Sierros, E. M. Sabolsky, “Nanoindentation
Studies of Diamond-like Carbon Coated β-SiAlON Structural Ceramics,” Poster
presentation at the Materials Science Technology 2014 (MST’14) Conference,
Pittsburgh, PA, October 12-16, 2014.
E.M. Sabolsky, K. Sabolsky, R. Chockalingam, S. Chockalingam, M. Palmisiano,
“Electrical and Thermomechanical Characterization of Silicide/Oxide Composites”,
Oral presentation at the Materials Science Technology 2014 (MST’14) Conference,
Pittsburgh, PA, October 12-16, 2014.
R. Chockalingam, S. Basu, E.M. Sabolsky and K. Sabolsky, “Multi-doped CeO2 as
Cathode Materials for Low Temperature Solid Oxide Fuel Cells,” Poster presentation
at the Materials Science Technology 2014 (MST’14) Conference, Pittsburgh, PA,
October 12-16, 2014.
J. Taub, M. A. Jerabek, T. Evans, and E. M. Sabolsky, ”Satellite Fuel Leak Detection
Using PZT-based µSAW Sensors,” Oral presentation at the Materials Science Technology
2014 (MST’14) Conference, Pittsburgh, PA, October 12-16, 2014.
K. Sabolsky, A. Bulbule, S. Chockalingam, R. Chockalingam, and E. M. Sabolsky,
S. Morrow, “Microwave Sintering of Doped-CeO2 Nanomaterials,” Poster presentation
at the Materials Science Technology 2014 (MST’14) Conference, Pittsburgh, PA,
October 12-16, 2014.
Q. Huang, D. Bhattacharyya, and E.M. Sabolsky, “Dynamic Model of a Smart Refractory
Brick for Gasifier Applications,” Oral presentation at the 2014 AIChE Annual
Meeting, Atlanta, Georgia, November 16-21, 2014.
E. Çiftyürek, C. Wildfire, K. Sabolsky, and E. M. Sabolsky, “Tungstates and Molybdates
for High Temperature H2, SO2, and H2S Chemical Sensor Applications,” Poster
presentation at the Gordon Research Conference on Challenges Around Transport
and Reactivity in Ceramics, South Hadley, MA, USA. July 20-25, 2014.
E. M. Sabolsky, E. Çiftyürek, C. Wildfire, K. Sabolsky, J. Taub, K. Sierros,
and T. H. Evans, “Nano-Derived Microsensors for Monitoring Gas Species in Harsh-Environment”,
Invited oral presentation at the 225th Electrochemical Society Meeting, Orlando,
FL, May 11-15, 2014.
K.M. Dunnick, M.A. Badding, D. Schwegler-Berry, N. Marshall, E. Sabolsky, and
S.S. Leonard, “Evaluating Cerium Oxide Nanoparticle Cytotoxicity,” Poster presentation
at the Allegheny Eerie Society of Toxicology, Morgantown, WV. May 15-16, 2014.
E. M. Sabolsky, E. Çiftyürek, K. Sabolsky, “Nano-derived Tungstate and Molybdate
Oxides for the Sensing of H2, H2S and SO2 at High Temperatures”, Oral presentation
at the 13th Annual Ceramics Congress, Montecatini, Italy, June 8-13th, 2014.
K. Sabolsky, A. Bulbule, S. Cronin, K.A. Sierros, E.M. Sabolsky, “Microwave Sintering
of Ceramic Electrolyte Nanomaterials,” Poster presentation at the 13th Annual
Ceramics Congress, Montecatini, Italy, June 8-13th, 2014.
K.M. Dunnick, D. Schwegler-Berry, N. Marshall, E. Sabolsky, and S.S. Leonard,
“Role of Valence State in Cerium Oxide Nanoparticle Toxicity,” Poster presentation
at the WVU American Association of Pharmaceutical Scientists Regional Research
Forum, Morgantown, WV. June 12-13, 2014.
K. M. Dunnick, E. Sabolsky, and S.S. Leonard, “Effects of Valence State on Cerium
Oxide Nanoparticle Toxicity”, Oral presentation at the 6th Annual Pittsburgh
American Association of Pharmaceutical Scientists Student Chapters’ Research
Symposium, Pittsburgh, PA. Oct 17, 2014. “
K.M. Dunnick, E. Sabolsky, S.S. Leonard, “Effects of Doped Cerium Oxide Nanoparticles
on Reactive Oxygen Species Production”, Oral presentation at the 8th Conference
on Metal Toxicity Carcinogenesis, Albuquerque, NM. Oct 26-29 2014.
V.C. Minarchick, P.A. Stapleton, N.R Fix, S.S. Leonard, E.M. Sabolsky, and T.R.
Nurkiewicz, ”Nano-Cerium Dioxide Exposure and Arteriolar Dysfunction: What
Is the Mechanism?,” Poster presentation at the Society of Toxicology Annual
Meeting, Phoenix, AZ, March 2014.
V.C Minarchick, P.A. Stapleton, N.R. Fix, S.S. Leonard, E.M. Sabolsky, and T.R.
Nurkiewicz, “Cerium Dioxide Nanoparticles: Determining the Source of Microvascular
Dysfunction,” Poster presentation at the Van Liere Research Day West Virginia
University, Morgantown, WV, February 2014.
V.C. Minarchick, P.A. Stapleton, N.R. Fix, S.S. Leonard, E.M. Sabolsky, and T.R.
Nurkiewicz, “Nanomaterial Exposure Route Differentially Affects Microvascular
Function,” Poster presentation at the NanoSAFE Bioelectronics and Biosensing
Symposium, Morgantown, WV, April 2014.
V.C Minarchick, P.A. Stapleton, N.R. Fix, S.S. Leonard, E.M. Sabolsky, and T.R.
Nurkiewicz, “Determining a Mechanistic Link Between Cerium Dioxide Nanoparticles
and Arteriolar Dysfunction,” Poster presentation at the Allegheny-Erie Regional
Chapter of the Society of Toxicology 28th Annual Meeting. Morgantown, WV, May
2014.
V.C. Minarchick, P.A. Stapleton, N.R. Fix, S.S. Leonard, E.M. Sabolsky, and T.R.
Nurkiewicz, “Smooth Muscle Signaling: A Mechanism for Cerium Dioxide Nanoparticle
Toxicity,” Poster presentation at the West Virginia University School of Pharmacy
Regional Research Forum And Annual Meeting. Morgantown, WV, June 2014.
T. Weadon, E.M. Sabolsky, and T. Evans, “Strategic Design of a 0:3 Ceramic:Polymer
Composite Capacitive Sensor Array for Haptic Feedback in Robotic Space Servicing
Applications,” Oral presentation at the 88th Annual Meeting of the W.Va. Academy
of Science at Canaan Valley Institute, Davis, WV (April 6, 2013).
B. Cantero-Tubilla, J. Zondlo, A. McClung, C. Xu, K. Sabolsky, and E.M. Sabolsky,
“Direct Carbon Fuel Cells: Performance and Degradation Mechanisms” Poster presentation
at the 88th Annual Meeting of the W.Va. Academy of Science at Canaan Valley
Institute, Davis, WV (April 6, 2013).
J. Gore, T. Weadon, E.M. Sabolsky, and T. Evans, “Fabrication and Testing of
Piezoresistive Tactile Sensors” Poster presentation at the 88th Annual Meeting
of the W.Va. Academy of Science at Canaan Valley Institute, Davis, WV (April
6, 2013).
J. Taub, T. Evans, and E.M. Sabolsky, “Leak Detection Sensors for Autonomous
Robotic Refueling of Orbital Satellites,” Poster presentation at the 88th Annual
Meeting of the W.Va. Academy of Science at Canaan Valley Institute, Davis,
WV (April 6, 2013).
P.E. Iyere, E.M. Sabolsky, S.L. Rowan, I.B. Celik, K. Sabolsky, “Solid-State
Synthesis of Calcium Carbide”, Oral presentation at the 30th Annual International
Pittsburgh Coal Conference, Beijing, China (September 15-18, 2013).
K. Sabolsky, A. Bulbule, E.M. Sabolsky, and S. Morrow, “Microwave Sintering of
Carbide and Oxide Nanomaterials,” Poster presentation at the Materials Science
Technology 2013 (MST’13) Conference, Montreal, Quebec, Canada (October 27-31,
2013).
O. Ozmen, K. Sabolsky, J. Zondlo, S. Lee, K. Gerdes, and E.M. Sabolsky, “Electrochemical
Performance of Nano-impregnated SOFC Anodes,” Oral presentation at the Materials
Science Technology 2013 (MST’13) Conference, Montreal, Quebec, Canada (October
27-31, 2013).
E. Çiftyürek, K. Sabolsky, and E.M. Sabolsky, “High-Temperature Nano-derived
Sensor Development for Detection of H2S and SO2 Emissions,” Oral presentation
at the Materials Science Technology 2013 (MST’13) Conference, Montreal, Quebec,
Canada (October 27-31, 2013).
S. Cronin, E.M. Sabolsky, and K. Sierros, “A Versatile Process for Large-Area
Fabrication of High-Temperature Multi-Material Patterns on Flexible Optoelectronic
Substrates,” Oral presentation at the 2013 Materials Research Society Fall
Meeting and Exhibit, Boston, MA, (December 1-6, 2013).
E.M. Sabolsky, C. Wildfire, E. Çiftyürek, and K. Sabolsky, “High-Temperature
Nanomaterials for Electrochemical Micro-Sensors,” Oral presentation at the
Electronic Materials and Applications 2012 conference, Orlando, FL (January
18-20, 2012).
V.C. Minarchick, P.A. Stapleton, D.W. Porter, E.M. Sabolsky, and T.R. Nurkiewicz,
“Pulmonary Nanoceria Exposure Impairs Coronary and Mesenteric Arteriolar Reactivity,”
Oral presentation at the Society of Toxicology 51st Annual Meeting, San Francisco,
CA (March 11-15, 2012).
V.C. Minarchick, P.A. Stapleton, D.W. Porter, E.M. Sabolsky, and T.R. Nurkiewicz,
“Nano Cerium Dioxide (CeO2) Exposure Impairs Mesenteric Arteriolar Reactivity,”
Poster presentation at the Van Liere Research Day, West Virginia University,
Morgantown, WV (March 9, 2012).
E. Çiftyürek, K. Sabolsky, and E.M. Sabolsky, “Degradation of Platinum Thin Film
Electrodes for High-Temperature MEMs Applications,” Oral presentation at the
Science, Technology and Research (STaR) Symposium and 87th Annual Meeting of
the W.Va. Academy of Science at West Virginia State University, Institute,
WV (April 20-21, 2012).
P. Gansor, C. Xu, K. Sabolsky, J. Zondlo, and E.M. Sabolsky, “An H2S-tolerant
Ni/GDC anode with GDC Barrier Layer,” Oral presentation at the Science, Technology
and Research (STaR) Symposium and 87th Annual Meeting of the W.Va. Academy
of Science at West Virginia State University, Institute, WV (April 20-21, 2012).
J. Mullenax, P. Browning, W. Huebsch, and E.M. Sabolsky, “Electrochemical and
Mechanical Evaluation of Multifunctional Lithium Ion Batteries,” Poster presentation
at the Science, Technology and Research (STaR) Symposium and 87th Annual Meeting
of the W.Va. Academy of Science at West Virginia State University, Institute,
WV (April 20-21, 2012).
E.M. Sabolsky, C. Wildfire, E. Çiftyürek, and K. Sabolsky, "Nano-Derived, Micro-Chemical
Sensors for High-Temperature Applications", Invited oral presentation at the
221st Conference of the Electrochemical Society, Seattle, WA (May 6-10, 2012).
B. Cantero-Tubilla, C. Xu, J. W.Zondlo, K. Sabolsky, E. M. Sabolsky, "Hybrid
Direct Carbon Fuel Cell: Catalytic Effect of Carbonate Cation and Amount of
Carbon Fuel in Cell Performance", Oral presentation at the 221st Conference
of the Electrochemical Society, Seattle, WA (May 6-10, 2012).
E. Çiftyürek, K. Sabolsky, and E.M. Sabolsky, “High-Temperature Compatible Electrodes
with Various Microstructural Architectures,” Oral presentation at the 221st
Conference of the Electrochemical Society, Seattle, WA (May 6-10, 2012).
V.C. Minarchick, P.A. Stapleton, D.W. Porter, E.M. Sabolsky, and T.R. Nurkiewicz,
“Dose Exposure Route Matter: Assessing the Effects of Nano-Cerium Dioxide Exposure
on Arteriolar Reactivity,” Poster presentation at the Allegheny-Erie Regional
Chapter of the Society of Toxicology 26th Annual Meeting, Pittsburgh, PA (May
10-11, 2012).
K. Sabolsky, J.A. Yancey, and E.M. Sabolsky, “Electrode Development for All-Solid-State
Li-ion Batteries,” Poster presentation at the 10th International Symposium
on Ceramic Materials and Components for Energy and Environmental Applications
2012 (CMCEE’12) Dresden, Germany (May 20-23, 2012).
E.M. Sabolsky, P. Gansor, C. Xu, J. Zondlo, and K. Sabolsky, “Investigation of
Phosphine and Sulfur Tolerant Anodes for Solid Oxide Fuel Cells,” Oral presentation
at the 10th International Symposium on Ceramic Materials and Components for
Energy and Environmental Applications 2012 (CMCEE’12) Dresden, Germany (May
20-23, 2012).
E.M. Sabolsky, C. Wildfire, E. Çiftyürek, and K. Sabolsky, “High-Temperature
Nano-Derived Chemical Micro-Sensors,” Oral presentation at the 10th International
Symposium on Ceramic Materials and Components for Energy and Environmental
Applications 2012 (CMCEE’12) Dresden, Germany (May 20-23, 2012).
E. Çiftyürek, C. Wildfire, and E.M. Sabolsky, “High-Temperature Nano-Derived
Sensors for Online Monitoring of SO2 Emissions,” Oral presentation at the Materials
Science Technology 2012 (MST’12) Conference, Pittsburgh, PA (October 7-11,
2012).
T.I. Muchenik, K. Sabolsky, and E.M. Sabolsky, “CoFe2O4-Pb(Zr,Ti)O3 composite
Sol-Gel Films for Magnetostrictive Applications,” Oral presentation at the
Materials Science Technology 2012 (MST’12) Conference, Pittsburgh, PA (October
7-11, 2012).
T. Weadon, E.M. Sabolsky, and T. Evans, “Composite Capacitive Tactile/Force Sensor
Arrays for Robotic Space Applications,” Oral presentation at the Materials
Science Technology 2012 (MST’12) Conference, Pittsburgh, PA (October 7-11,
2012).
E.M. Sabolsky, C. Wildfire, and K. Sabolsky, “Mixed-Conducting Nanomaterials
for Application in High-Temperature Chemical Micro-Sensors,” Oral presentation
at the Materials Science Technology 2012 (MST’12) Conference, Pittsburgh, PA
(October 7-11, 2012).
J. Yancey, K. Sabolsky, and E.M. Sabolsky, “Electrode Development for All-Ceramic
Lithium Ion Batteries,” Poster presentation at the Materials Science Technology
2012 (MST’12) Conference, Pittsburgh, PA (October 7-11, 2012).
A. Bulbule, K. Sabolsky, and E.M. Sabolsky, and S. Morrow, “Microwave Sintering
of Carbide and Oxide Nanomaterials,” Poster presentation at the Materials Science
Technology 2012 (MST’12) Conference, Pittsburgh, PA (October 7-11, 2012).
E.M. Sabolsky, “Advanced Materials Research for Clean Fossil and Biomass Energy
Technologies,” Invited oral presentation at Simon Fraser University, Burnaby,
Canada (Nov. 20, 2012).
E.M. Sabolsky, C. Wildfire, E. Çiftyürek, and K. Sabolsky, "Performance and Stability
of High-Temperature Nano-Derived Hydrogen Sensors", Oral presentation at the
220th Conference of the Electrochemical Society, Boston, MA (2011).
S.R. Gandavarapu, K. Sabolsky, K. Gerdes and E.M. Sabolsky, "Microstructural
Engineering of Porous Cathode for Solid Oxide Fuel Cell Applications", Oral
presentation at the 220th Conference of the Electrochemical Society, Boston,
MA (2011).
J. Mullenax, P. Browning, W. Huebsch, E.M. Sabolsky, "Composite Multifunctional
Lithium Ion Batteries", Oral presentation at the 220th Conference of the Electrochemical
Society, Boston, MA (2011).
B. Cantero-Tubilla, C. Xu, J. W.Zondlo, K. Sabolsky, E. M. Sabolsky, "Direct
Biomass Fuel Cells: Performance and Degradation Mechanisms", Oral presentation
at the 220th Conference of the Electrochemical Society, Boston, MA (2011).
C. Xu, J.W. Zondlo, E.M. Sabolsky, P. Gansor, and K. Sabolsky, “PH3 Removal by
Means of a Pre-filter for a Ni-YSZ Anode,” Oral presentation at Materials Science
Technology Conference, Columbus, OH (2011).
P. Gansor, C. Xu, J. Zondlo, K. Sabolsky, and E.M. Sabolsky, “A Study of H2S
and PH3 Effects on Alternative Anodes for Solid Oxide Fuel Cells,” Poster presentation
at DOE’s 12th Annual Solid State Energy Conversion Alliance (SECA) Workshop,
Pittsburgh, PA (2011).
V.C. Minarchick, E.M. Sabolsky, and T.R. Nurkiewicz, “Intratracheal Instillation
of Ceria Nanoparticles Alters Endothelium -Dependent and -Independent Dilation
in Rat Arterioles,” Poster presentation at Allegheny-Erie Society of Toxicology
25th Annual Spring Meeting, Pittsburgh, PA (2011).
V.C. Minarchick, E.M. Sabolsky, and T.R. Nurkiewicz TR., “The Effects of Ceria
Nanoparticles on the Reactivity of Rat Mesentery and Coronary Arterioles,”
Poster presentation at Society of Toxicology 50th Annual Meeting and ToxExpo,
Washington D.C. (2011).
C. Yarborough, L. McDowell, S. Blackshire, K. Sabolsky, and E.M. Sabolsky, “Micropatterning
of Nano-Derived Micro-Sensors,” Oral presentation at the Electronic Materials
and Applications 2011 conference, Lake Buena Vista (Orlando), FL (2011).
E.M. Sabolsky, S. Razmyar, C. Ndhlovu, and K. Sabolsky, “Processing and Properties
of BICUVOX Electrolytes for SOFC Applications,” Oral presentation at the Electronic
Materials and Applications 2011 conference, Lake Buena Vista (Orlando), FL
(2011).
P. Gansor, C. Xu, J. Zondlo, K. Sabolsky, and E.M. Sabolsky, “A Parametric Study
of H2S and PH3 Effects on Alternative Anodes for Solid Oxide Fuel Cells,” Poster
presentation at the 12th Conference of the European Ceramic Society (ECerS
XII) conference, Stockholm, Sweden (2011).
C. Wildfire, L. McDowell, K. Sabolsky, and E.M. Sabolsky, “High Temperature Nano-Derived
Hydrogen Sensors,” Invited oral presentation at the 12th Conference of the
European Ceramic Society (ECerS XII) conference, Stockholm, Sweden (2011).
E.M. Sabolsky, S. Razmyar, C. Ndhlovu, and K. Sabolsky, “Intermediate Temperature
SOFCs Based on Enhanced BICUVOX Electrolytes,” Oral presentation at the 12th
Conference of the European Ceramic Society (ECerS XII) conference, Stockholm,
Sweden (2011).
M.W. Smith, D.A. Berry, D. Shekhawata, D.J. Hanes, C.N. Wildfire, E.M. Sabolsky,
“Effect of Oxide Catalyst Surface Coverage in the Presence of Oxygen-Conducting
Supports for CPOX,” Oral presentation at the 241st American Chemical Society
Annual Conference, Anaheim, CA, (2011).
S. Razmyar, K. Sabolsky, and E.M. Sabolsky, “Microstructural Control and Characterization
of BICUVOX Ceramics,” Oral presentation at the Materials Challenges in Alternative
Renewable Energy conference, Cocoa Beach, FL (2010).
E.M. Sabolsky, K. Sabolsky, S. Razmyar, T. Larrabee, and C. Heim, “Microstructural
Control of Highly-Conductive Ceramic Electrolytes,” Invited oral presentation
at the Electronic Materials and Applications 2010 conference, Lake Buena Vista
(Orlando), FL (2010).
C. Heim, K. Sabolsky, and E.M. Sabolsky, “Morphological Control of BaTiO3 Solid-Solution
Nanoparticles,” Poster presentation at the MST 2009 Conference, Pittsburgh,
PA (2009).
M.M. Seabaugh, K. Sabolsky, E.M. Sabolsky, S. Ibanez, and M.J. Day, “Materials
and Components for High Power Density SOFCs,” Oral presentation at the 31st
International Conference Exposition on Advanced Ceramics and Composites of
the American Ceramics Society, Cocoa Beach Meeting, Daytona, FL (2007).
K. Sabolsky, M.M. Seabaugh, E.M. Sabolsky, and S.M. Haile, “Component Manufacturing
and Optimization of Protonic SOFCs,” Poster presentation at the 31st International
Conference Exposition on Advanced Ceramics and Composites of the American Ceramics
Society, Cocoa Beach Meeting, Daytona, FL (2007).
E.M. Sabolsky, L. Maldonado, V. Zancudo, W. Collins, J. Foreman, and S. Swartz,
“Processes for Manufacturing Tubular Solid Oxide Fuel Cells,” Oral presentation
at the 30th International Conference Exposition on Advanced Ceramics and Composites
of the American Ceramics Society, Cocoa Beach Meeting (2006).
E.M. Sabolsky, M.M. Seabaugh, L. Maldonado, W. Collins and S. Swartz, “Novel
Thin Film Ceria Membranes for Small-Scale Oxygen Generation Systems,” Oral
presentation at the Spring Meeting of the American Institute of Chemical Engineers
(2005).
E.M. Sabolsky, M.M. Seabaugh, L. Maldonado and W. Collins, “Novel Thin Film Ceria
Membranes for Small-Scale Oxygen Generation Systems,” Poster presentation at
the Spring Meeting of the American Institute of Chemical Engineers (2005).
E.M. Sabolsky, L. Maldonado, K. Fischbach, J. Evarts and T. Conlin,
“High Performance Lead-Free Piezoelectric Ceramics,” Poster presentation at the
NSF DMII Grantees Conference (2005).
M.M. Seabaugh, E.M. Sabolsky, L. Maldonado, B. McCormick and W. Collins, “Doped-CeO2
Membranes for Oxygen Separation,” Poster presentation at Annual Meeting and
Fall Showcase of American Institute of Chemical Engineers (2004).
M.M. Seabaugh, E.M. Sabolsky, L. Maldonado and B. Emley, “Doped Ceria Membranes
for Oxygen Separation,” Poster presentation at the Annual Meeting and Spring
Showcase of the American Institute of Chemical Engineers (2003).
E.M. Sabolsky, L. Maldonado and S. Ibanez, “Development of a Templated Grain
Growth (TGG) Processing System for Texturing Piezoelectric Ceramics,” Oral
presentation at Annual Convention of the American Ceramic Society (2003).
E.M. Sabolsky, L. Maldonado, S. Ibanez, S. Swartz and W. Dawson, “Development
of a Templated Grain Growth (TGG) Processing System for Texturing Piezoelectric
Ceramics,” Oral presentation at U.S. Navy Workshop on Acoustic Transduction
Materials and Devices at Penn State University, PA (2003).
E.M. Sabolsky, S. Swartz and W. Dawson, “Status of the Development of Textured
PMN-PT Ceramics for Single Crystal Applications,” Oral presentation at DARPA/ONR
PiezoCrystals Workshop (2003).
E.M. Sabolsky, L. Maldonado, S. Ibanez, S. Swartz and W. Dawson, “Development
of a Templated Grain Growth (TGG) Processing System for Texturing Piezoelectric
Ceramics,” Oral presentation at the Annual Convention of the American Ceramic
Society (2002).
E.M. Sabolsky, S. Swartz and W. Dawson, “Texturing PMN-PT Ceramics by the Templated
Grain Growth Process Using SrTiO3 Template Particles,” Oral presentation at
the U.S. Navy Workshop on Acoustic Transduction Materials and Devices at Penn
State University, PA (2002).
E.M. Sabolsky, S. Swartz and W. Dawson, “Texturing PMN-PT Ceramics by the Templated
Grain Growth Process Using SrTiO3 Template Particles,” Poster presented at
the U.S. Navy Workshop on Acoustic Transduction Materials and Devices at Penn
State University, PA (2002).
M.M. Seabaugh, K. Hasinska, G. Cheney, A-M. Azad, W. Dawson, S. Swartz and E.M.
Sabolsky, “Development of a Templated Grain Growth System for Texturing Piezoelectric
Ceramics,” Oral presentation at the ASME International Mechanical Engineering
Congress and Expositions at New York, NY (2001).
E.M. Sabolsky, S. Kwon, S. Trolier-McKinstry, and G.L. Messing “Piezoelectric
and Dielectric of Fiber-textured PMN-32PT Ceramics by Templated Grain Growth,”
Oral presentation at the U.S. Navy Workshop on Acoustic Transduction Materials
and Devices at Baltimore, MD (2001).
E.M. Sabolsky, S. Kwon, S. Trolier-McKinstry, and G.L. Messing, “Piezoelectric
and Dielectric of Fiber-textured PMN-32PT Ceramics by Templated Grain Growth,”
Oral presentation at The Annual Meeting of The American Ceramic Society at
Indianapolis, IN (2001).
E.M. Sabolsky, C. Duran, B. Brahmaroutu, S. Trolier-McKinstry, and G.L. Messing,
“Textured Ceramics- Processing Ceramics with Property Anisotropy,” Poster presentation
at the 7th International Conference on Ceramic Processing Science, Inuyama
city, Japan (2000).
E.M. Sabolsky, S. Kwon, A. James, E. Suvaci, S. Trolier-McKinstry, and G.L. Messing,
“Dielectric and Electromechanical Properties of 001-Textured PMN-PT,” Poster
presentation at the 12th International Symposium on the Application of Ferroelectrics,
Honolulu, Hawaii (2000).
E.M. Sabolsky, S. Kwon, S. Trolier-McKinstry, and G.L. Messing, “Heteroepitaxial
Templated Grain Growth of PMN-35PT,” Oral presentation at The Annual Meeting
of The American Ceramic Society at St. Louis, MO (2000).
S. Kwon, E.M. Sabolsky, G.L. Messing, and S. Trolier-McKinstry, “Reactive Templated
Grain Growth of Textured Ceramics” Oral presentation at The Annual Meeting
of The American Ceramic Society at St. Louis, MO (2000).
K.S. Oh, E.M. Sabolsky, and G.L. Messing, “Modeling of the Grain Growth in PMN-35PT
with Non-constant Mobility,” Oral presentation at The Annual Meeting of The
American Ceramic Society at St. Louis, MO (2000).
E.M. Sabolsky, S. Kwon, E. Suvaci, S. Trolier-McKinstry, and G.L. Messing “Templated
Grain Growth of 0.65 Pb(Mg1/3Nb2/3)O3-0.35PbTiO3 Single Crystals on BaTiO3
Crystals,” Oral presentation U.S. Navy Workshop on Acoustic Transduction Materials
and Devices at Penn State University, PA (2000).
E.M. Sabolsky, G.L. Messing, and S. Trolier-McKinstry, “Templated Grain Growth
(TGG) of PMN-PT from a BaTiO3 Template Crystal,” Poster presentation at The
Annual Meeting of The American Ceramic Society at Indianapolis, IN (1999).
E.M. Sabolsky, G.L. Messing, and S. Trolier-McKinstry, “Templated Grain Growth
of Perovskite Ferroelectrics,” Poster presentation at the Gordon Research Conference
on Solid State Studies in Ceramics at Meriden, NH (1998).